產品詳情
性能特點 Main Features
l?用于鋁門窗型材端面的加工。大型工作臺、大走刀行程，一次可加工6至10根型材。位置可調整的多片刀具，使得更換型材時不必更換刀具，從而節約生產準備周期和刀具費用。根據不同的型材，多組刀可以同時工作也可以單獨工作。更大的刀具直徑，使加工范圍增大。加厚的型材壓板，防止型材變形。通過氣液轉換完成工作進給，工作更平穩,可完成加強中梃的銑削加工。
l?加工端面粗糙度：Ra12.5μm。
l?Used in processing the side surface of profiles for aluminum bs & doors.Relied on large worktable and long feed distance, 6~10 pieces of profiles can be processed at the same time.Adjustable multiple cutters need not be replaced when the profiles changed, which can save the preparation period and cost of tools. Multiple cutters can work on different profiles individually as well as simultaneously.Larger diameter of cutter makes the processing extent expanded. Thickened pressing board can aviod the debation of the profiles.The feeding is completed through the transbation of gas and liquid, which makes the work more stable.
l?Processing roughness:Ra12.5μm
?
技術參數??Technical beters
|
輸入電源 |
Power supply |
380V 50Hz |
|
輸入功率 |
Total power |
2×2.2KW |
|
電機轉速 |
Motor rev |
2850r/min |
|
氣源工作氣壓 |
Air pressure |
0.5~0.8MPa |
|
銑刀直徑 |
Diameter of milling cutter |
Φ250mm |
|
外形尺寸 |
Dimension |
2100×1200×1550mm |
|
工作臺尺寸 |
Work Table dimension |
530×320mm |
